Fenner V Belts, For Textile Industry 6.59 $/ Unit
In Stock
Product Specification
Width | 5mm |
Brand | Fenner |
Application | Textile Industry |
Outer Measurement | 50 Inch |
Type | Wrapped V Belt,Raw Edge V Belt,Poly V belt,Kevlar V Belt |
Usage/Application | Industrial |
Country of Origin | Made in India |
Add to Wishlist
Add to Wishlist
Cross Section: A Power Loom V Belt, For Textile Industry 1.20$ / Piece
In Stock
Product Specification
Application | Textile Industry |
Cross Section | A |
Belt Length | Upto 400 Inches |
Angle | 40 Degree |
Type | V-Belt |
Brand | Optimax Prime |
Material | polychloropene Rubber |
Temperature Range | -20 to 80 degree C |
Usage/Application | Industry , Agriculture , Textile , Flour Mills |
Add to Wishlist
Add to Wishlist
Variable Speed Belt, For Power Transmission 5.99 $ / Piece
In Stock
Product Specification
Cross Section | A |
Application | Power Transmission |
Type | Narrow Deep |
Material | Rubber |
Country of Origin | Made in India |
Add to Wishlist
Add to Wishlist
Open End Industrial V Belt 5.39 $ / Unit
In Stock
Product Specification
Brand | Optibelt |
Type | Open End V Belts |
Material | Rubber |
Color | Black |
Size | 45 mm |
Sections | Y/6, 8, Z/10, A/13, B/17, 20, C/22, 25, D/32, E/40 |
Roll length | 25 m |
Add to Wishlist
Add to Wishlist
Flexer Industrial V Belt, Angle: 40 Degree 7.79 $/ Number
In Stock
Product Specification
Brand | Flexer |
Type | V belts |
Angle | 40 degree |
Section | A,B,C,D,E,SPA,SPB,SPC,SPZ 8V,BB,CC |
Material | Rubber |
Usage/Application | Industrial |
Temperature Range | 90 degree C |
Belt Length | 40 inches to 600 inches |
Heat Resistance | Yes |
Oil Resistance | Yes |
Minimum Order Quantity | 50 Number |
Add to Wishlist
Add to Wishlist
Sub Sonic Wind Tunnel
In Stock
Product Description
WIND TUNNEL.(Open Circuit Wind Tunnel ) Purpose : To study the Lift – Drag – Pitching forces on models.- To study the pressure distribution on models (Aerofoil, cylinder).
- To study the drag – bluff bodies, automobile models.
- To study the velocity in the test section
- Type of tunnel : Low speed, open circuit , suction type
- Test section : 300 X 300 X 1000 mm (length) with transparent windows.
- Air velocity : 0 – 30 m / Sec measured by pitot tube with traversing Mechanism.
- Drive : Variable speed AC motor of capacity 2HP TO 3HP, 1500 RPM With Thyristor controller
- Contraction Ratio: 9 : 1
- Effuser: In let section 1000 X 1000mm throat section of 300 X 300mm Length 2 meter made of FRP bodywith MS support.
- Diffuser: Square to round section of 600mm dia length 2 mts. Made of M s body With MS support.
- Blower unit : 600mm dia (I.D) M S Shell with housing for axial flow fan And rigid MS support/frame.
- Fan : 4 – 8 blades axial flow fan.
- Overall size : 1.2 X 2.2 X 5.5 mt Approx.
- Control panel : Independent control panel consisting of digital lift drag
- Power requirement : A.C. 3 phases 440 Volt, 20 Amps with neutral and earth.
Additional Information
Item Code | ELSHADDAI-AERO |
Delivery Time | 1 – 2 MONTHS |
Production Capacity | ELSHADDAI ENGINEERING |
Add to Wishlist
Add to Wishlist
DJI Plastic Mavic Mini Propeller Guard Get Free Earbuds
In Stock
Product Description
DJI Mavic Mini Combo Propellor Guard.
Add to Wishlist
Add to Wishlist
Zero Air Generator For GC, 3 Phase
In Stock
Product Specification
Brand/Make | Athena |
Phase | 3 Phase |
Frequency | 50 Hz |
Room temperature | 5 Temp C - 25 Temp C |
Capacity of ZAG | 4 LPM at 5kg/cm2 |
Start up time | 5 minutes |
Add to Wishlist
Add to Wishlist
Lab Zero Air Generator
In Stock
Product Specification
Minimum Order Quantity | 1 Piece |
Add to Wishlist
Add to Wishlist
Zero Air Gas Generator (without Air Compressor)
In Stock
Product Description
Supplied with 40µ Air Filter with Auto Drain at inlet & 0.01µ Mist Filter at outlet to remove moisture, dust & mist, Inline Particulate Filter, 1/4" Nut (Pack of 10 Nos.), 1/4" Front & Back Ferrule (Pack of 10 Set), Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
Add to Wishlist
Add to Wishlist
Medical Oxygen Plant, 100 LPM
In Stock
Product Specification
Flow Rate(LPM) | 100 LPM |
Oxygen Generator Capacity (Nm3/hr) | 6 Nm3/Hr |
Air Compressor (kW) | 11 KW |
Technology Used | PSA(Pressure Swing Adsorption) |
Purity Of Oxygen | 93+-3% |
No. of Cylinders Filled In A Day | 20 |
Application | Medical |
Installation Time | 25-30 Days |
Outlet Pressure | 4 Bar (g) |
Brand | Sonitech |
Add to Wishlist
Add to Wishlist
Oxygen & Nitrogen Gas Plant
In Stock
Product Description
Meeting the demands of clients as a service provider, we are engaged in offering PSA Nitrogen Gas Plant Maintenance Service. We provide maintenance services for all PSA Technology Nitrogen gas related plants regardless of original manufacturer. We offer long-term maintenance contract at a very reasonable rate that takes away operational constraints away from you.
Add to Wishlist
Add to Wishlist
Join our newsletter
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we not spam!