Product Specification
Material | Mild Steel |
Usage/Application | For Tractor Use |
Size | 12 Inch(L) |
Product Type | LCP-17M |
Surface Finish | Polished |
Thickness | 8 mm |
Color | Silver |
Minimum Order Quantity | 500 Piece |
Add to Wishlist
Add to Wishlist
Clutch cylinder elite 13.24 $ / Piece
In Stock
Product Specification
Vehicle Type | Car |
Model Year | Any |
Material | plastic |
Country of Origin | Made in India |
Minimum Order Quantity | 1 Piece |
Add to Wishlist
Add to Wishlist
Clutch Assembly Parts, Packaging Size: Piece 2.41 $ / Piece
In Stock
Product Specification
Usage/Application | Engine |
Packaging Size | Piece |
Material | Mild Steel |
Color | Gray |
Surface Finishing | Plain |
Weight | 1 Kg |
Minimum Order Quantity | 20 Piece |
Add to Wishlist
Add to Wishlist
Maruti Mild Steel Car Cluth Kit
In Stock
Product Specification
Vehicle Brand | Maruti |
Vehicle Model | Swift |
Material | Mild Steel |
Size (Diameter) | 13 Inch |
Box Contains | Clutch Assembly |
Packing | Box |
Vehicle Type. | Car |
Thickness | 10.8mm |
Minimum Order Quantity | 2 Box |
Add to Wishlist
Add to Wishlist
Sub Sonic Wind Tunnel
In Stock
Product Description
WIND TUNNEL.(Open Circuit Wind Tunnel ) Purpose : To study the Lift – Drag – Pitching forces on models.- To study the pressure distribution on models (Aerofoil, cylinder).
- To study the drag – bluff bodies, automobile models.
- To study the velocity in the test section
- Type of tunnel : Low speed, open circuit , suction type
- Test section : 300 X 300 X 1000 mm (length) with transparent windows.
- Air velocity : 0 – 30 m / Sec measured by pitot tube with traversing Mechanism.
- Drive : Variable speed AC motor of capacity 2HP TO 3HP, 1500 RPM With Thyristor controller
- Contraction Ratio: 9 : 1
- Effuser: In let section 1000 X 1000mm throat section of 300 X 300mm Length 2 meter made of FRP bodywith MS support.
- Diffuser: Square to round section of 600mm dia length 2 mts. Made of M s body With MS support.
- Blower unit : 600mm dia (I.D) M S Shell with housing for axial flow fan And rigid MS support/frame.
- Fan : 4 – 8 blades axial flow fan.
- Overall size : 1.2 X 2.2 X 5.5 mt Approx.
- Control panel : Independent control panel consisting of digital lift drag
- Power requirement : A.C. 3 phases 440 Volt, 20 Amps with neutral and earth.
Additional Information
Item Code | ELSHADDAI-AERO |
Delivery Time | 1 – 2 MONTHS |
Production Capacity | ELSHADDAI ENGINEERING |
Add to Wishlist
Add to Wishlist
DJI Plastic Mavic Mini Propeller Guard Get Free Earbuds
In Stock
Product Description
DJI Mavic Mini Combo Propellor Guard.
Add to Wishlist
Add to Wishlist
Mild Steel Hot Mix Plant Plastic Crusher Machine, For Industrial, Capacity: 30 To 300 kg/Hr
In Stock
Product Specification
Usage/Application | Industrial |
Type Of Crushing Machines | Impact Crusher |
Material | Mild Steel |
Capacity | 30 to 300 kg/hr |
Voltage | 380 V |
Frequency | 50 Hz |
Phase | 3 Phase |
Power Ranges | 3 to 30 hp |
Noise level | 70 dB |
Add to Wishlist
Add to Wishlist
Double Shaft Twinshaft Plastic Recycling Machine, For Outdoor
In Stock
Product Description
Plastic Granules Machine ; PP Straw Making Machine / Refill Tube / Lollipop Stick Making Machine, Plastic Granules Machine ; PP Straw Making Machine / Refill Tube / Lollipop Stick Making Machine,
Add to Wishlist
Add to Wishlist
LDPE Plastic Recycling Agglomerator, Electricity, Capacity: Standard
In Stock
Product Description
Established in the year of 1987, H.R. Plastic Industries are the leading Manufacturer of an extensive array of Plastic Dana Making Machine, PVC Garden Pipe Making Machine, Plastic Scrap Grinder Machine, Plastic Granules Making Machine, Semi Automatic Tea Dryer Machine, Die Face Cutter, etc.
Add to Wishlist
Add to Wishlist
Plastic Recycling Agglomerator Machine, Blade Size: 12″-28″, Capacity: 50-700kg Per Hour
In Stock
Add to Wishlist
Add to Wishlist
Zero Air Generator For GC, 3 Phase
In Stock
Product Specification
Brand/Make | Athena |
Phase | 3 Phase |
Frequency | 50 Hz |
Room temperature | 5 Temp C - 25 Temp C |
Capacity of ZAG | 4 LPM at 5kg/cm2 |
Start up time | 5 minutes |
Add to Wishlist
Add to Wishlist
Lab Zero Air Generator
In Stock
Product Specification
Minimum Order Quantity | 1 Piece |
Add to Wishlist
Add to Wishlist
Zero Air Gas Generator (without Air Compressor)
In Stock
Product Description
Supplied with 40µ Air Filter with Auto Drain at inlet & 0.01µ Mist Filter at outlet to remove moisture, dust & mist, Inline Particulate Filter, 1/4" Nut (Pack of 10 Nos.), 1/4" Front & Back Ferrule (Pack of 10 Set), Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
Add to Wishlist
Add to Wishlist
Medical Oxygen Plant, 100 LPM
In Stock
Product Specification
Flow Rate(LPM) | 100 LPM |
Oxygen Generator Capacity (Nm3/hr) | 6 Nm3/Hr |
Air Compressor (kW) | 11 KW |
Technology Used | PSA(Pressure Swing Adsorption) |
Purity Of Oxygen | 93+-3% |
No. of Cylinders Filled In A Day | 20 |
Application | Medical |
Installation Time | 25-30 Days |
Outlet Pressure | 4 Bar (g) |
Brand | Sonitech |
Add to Wishlist
Add to Wishlist
Oxygen & Nitrogen Gas Plant
In Stock
Product Description
Meeting the demands of clients as a service provider, we are engaged in offering PSA Nitrogen Gas Plant Maintenance Service. We provide maintenance services for all PSA Technology Nitrogen gas related plants regardless of original manufacturer. We offer long-term maintenance contract at a very reasonable rate that takes away operational constraints away from you.
Add to Wishlist
Add to Wishlist
Able Diesel Engine- Greaves Concrete Groove Cutter, Model/Type: A/Gc-125 D
In Stock
Product Description
Groove cutter is ideal equipment for cutting hard concrete, asphalt, pavement and trench cutting etc, for expansion joints to avoid cracks in concrete
Add to Wishlist
Add to Wishlist
Join our newsletter
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we not spam!